DALEN Firewood processor 2052
Models & optional extras  |  Technical specifications  |  Picture gallery 2052
Product catalogue  | Video presentation  |  Why DALEN 2052  |  Printable version  |  Contact info
 

DALEN Firewood processor 2052 is designed in the same way as the professional 2054 processor, and the user-friendly machine copies many technical solutions from its “Big Brother”.

The clear-cut design has been continued, following model 2054, where the operator has a good overview and full control of operation procedures. The design of the protective covers gives you ample space during the input of large and bent logs.

The chain saw cuts up to Ø 40 cm
DALEN 2052-TH and –THF are delivered with a manual operating lever, which controls the cutting and splitting process. The movement of the lever alongside the machine is ergonomically correct. Model 2052-THS is delivered with hydraulic steering of all functions. The hydraulic steering contains an arched operating handle, hydraulic bar movement, hydraulic feeding conveyor and knife adjustment. These functions are operated with easy-to-reach levers, and make the machine even more effective. Model 2052-THF also includes a hydraulic feeding conveyor, making log-input easier.

The logs are cut with a 20” bar, and cuts logs up to 40 cm in diameter. The chain is hydraulically driven, and starts automatically when the bar is operated. The hydraulic operation is safer, produces less wear and tear, and reduced noise. You do not have to use V-belts, which cause wear and tear and the need for tightening.

A small, adjustable saw bar pump is activated every time the bar is operated, and ensures that the chain is lubricated. This is very important during changing temperatures, and especially during cold weather. The chain is lubricated with oil from a separate tank containing chain saw oil, because hydraulic oil can damage your health.

5.0/8.0 ton splitting power
The splitter has two speed levels. When the fast mode is activated, the splitter handles 5.0 tons. When the power mode is activated, it handles 8.0 tons. The short stroke makes it very effective when producing firewood. The splitting cycle is only 4.0 sec. The tractor’s PTO is operated at 400 rpm. Because of the low rotational speed, there is less noise and lower fuel-consumption.

While using the stepwise regulated stopper, the cutting length can easily be adjusted every 5 cm, from 15-40 cm.  During the splitting process the stopper gives way so that the log falls freely into the splitting channel. The machine is also equipped with a knife for splitting the logs 2 or 4 ways. Optional extras include a 6- and an 8- way splitting knife. In order to split the last part of the log, the machine’s log-holder keeps the short log in place, without endangering the operator.

Easy access during maintenance
The protective cover on top of the saw chain and feeding table can be lifted in one operation, so that the operator gains quick access to the chain when adjusting, changing components or filing. When the protective cover is open, the sword is locked in upper position, with easy access from both sides when filing the chain. The machine’s other components are also easy accessible, so that maintenance and troubleshooting can be carried out in an upright position.

Hydraulically powered discharge conveyor and module-based log-rack
The machine has an integrated 3-point coupling for connection to tractors, and is delivered with a PTO-shaft and fully tanked with hydraulic oil. When purchasing the DALEN Firewood Processor 2052, you gain access to password-protected internet pages containing information about maintenance and other useful tips concerning the machine. The effectiveness of the machine depends on how you organize the working process. This is why DALEN delivers module-based log deck and hydraulically driven discharge conveyors with the machine. Read more on separate pages.

DALEN delivers [ paint ] for mending paint damages.

* Hydraulic operation includes: Operating handle, hydraulic chain drive, hydraulic bar movement, hydraulic feeding conveyor and knife adjustment.